|
Driveway Gates
|
|
|
Design No.
Large Gate
|
Date :
6/18/2013 |
|
|
173" wide x 48" high
Approx. Weight :
759 lbs
|
|
|
|
List of Materials:
|
|
Image
|
Item No.
|
Item Name
|
Weight
|
Quantity
|
Unit Price
*
|
Sub Total
|
 |
2/1
|
1-1/2" Sq Edge Hammered Tubing
|
25.00 lbs
|
4
|
$37.95
|
$151.80 |
 |
3/3
|
3/4" Sq. Wavy Hammered Bar
|
20.05 lbs
|
18
|
$23.75
|
$427.50 |
 |
3/6
|
1"x3/8" Wavy Hammered Bar
|
12.90 lbs
|
5
|
$22.50
|
$112.50 |
 |
4/4
|
Wavy Bar Design Flat Bar
|
17.12 lbs
|
1
|
$23.75
|
$23.75 |
 |
7/131
|
1"x3/8" Wavy gate top
|
8.44 lbs
|
4
|
$28.50
|
$114.00 |
|
|
7/132
|
1"x3/8" Wavy gate btm
|
8.44 lbs
|
4
|
$28.50
|
$114.00 |
 |
5/16
|
Wavy design scroll end
|
2.54 lbs
|
1
|
$8.75
|
$8.75 |
 |
67/12
|
3/4" x 5/16" forged scroll
|
1.71 lbs
|
4
|
$4.75
|
$19.00 |
 |
67/8
|
3/4" x 5/16" forged scroll
|
1.06 lbs
|
38
|
$4.00
|
$152.00 |
 |
69/26
|
Malleable Steel Leaf
|
.79 lbs
|
17
|
$3.30
|
$56.10 |
 |
69/27
|
Malleable Steel Leaf
|
.79 lbs
|
17
|
$3.50
|
$59.50 |
 |
6/43
|
Pre-cut Banding Collar
|
.14 lbs
|
4
|
$1.15
|
$4.60 |
 |
7/21
|
1-1/2" Frame end in plain
|
2.59 lbs
|
4
|
$7.85
|
$31.40 |
 |
7/23a
|
1-1/2" Corner Block
|
.52 lbs
|
4
|
$4.50
|
$18.00 |
 |
82/9
|
Weldable steel railhead
|
0.70 lbs
|
34
|
$1.55
|
$52.70 |
 |
81/5
|
Weldable steel railhead
|
1.35 lbs
|
2
|
$3.45
|
$6.90 |
 |
89/15-20mm
|
Collar for 3/4" square bar
|
0.64 lbs
|
6
|
$3.00
|
$18.00 |
 |
90/19
|
Drop bar holder
|
0.10 lbs
|
2
|
$1.50
|
$3.00 |
 |
90/23
|
Drop bar guide for 3/4"
|
0.10 lbs
|
4
|
$2.85
|
$11.40 |
 |
90/2
|
3/4" Forged drop bar
|
5.30 lbs
|
2
|
$10.50
|
$21.00 |
 |
91/19
|
See RF# 12-2-3
|
3.24 lbs
|
2
|
$28.00
|
$56.00 |
|
|
91/20
|
Large gudgeon and hinge
|
3.24 lbs
|
2
|
$28.00
|
$56.00 |
 |
94/1
|
Forged Lock Plate
|
2.59 lbs
|
2
|
$15.00
|
$30.00 |
|
Total :
$1,547.90
(Excludes Shipping Charges)
|
|
*
Please note that prices are subject to change without notice
|
|
|
|
|
|
Painting Instructions:
We have included our high performance Vinylast paint and Fast Primer Zinc Phosphate as part of the material list.
Although we always recommend hot dipped galvanizing for outside work, we realize that this is not always possible. For non-galvanized work we recommend using our Fast Primer Zinc Phosphate followed by two coats of Vinylast following standard instructions.
Please note that non-galvanized ironwork may require regular maintenance. We recommend that all joints are fillet welded (Fully welded all the way around). There should be no rust, dust, damp, dirt, oil or grease on the work.
For inside work, just make sure the work is clean. You can apply Vinylast directly over the work without the need for a primer.
For full details on the paints and their application,
Click Here
|
|
|
Disclaimer :
This list has been worked to the best of our abilities. We accept no claims should any of the above references be incorrect, or should there be any missed. We urge customers to look at the above and consolidate with their own project. Customer should check that the number, style and quantity are suitable for their requirement.
|
|
|
