Checkout

My Account
Shopping cart

items -

Toggle Nav
Account

Albatros ABS-100G

Albatros ABS-100G For single gates up to 26ft (8m) or double gates up to 52ft (16m)
Note: Gate width is limited to 3 times the height.

ABS-100G System Configuration Formulas
For Opening Size "A" and Gate Frame Profile Thickness "T"
B: Hinge gap B (in) = 3-7/8" - T/2
L: Gate leaf width L (in) = (A - 3" - B) ÷ 2
G: Hinge to post connector tube length G (in) = L - 9-3/4" + B
E: Gate width in open position E (in) = (2 x T) + B + 3-1/8"
F: Net opening size F (in) = A - E
NOTE: The parameters in BOLD in the formulas above are inches

 

Piccolo Hinge Gaps by Profile Size
FRAME SIZE HINGE GAP ADJUSTABILITY
2" 2-3/4" +/- 5/16"
3" 2-1/4" +/- 5/16"
4" 1-3/4" +/- 5/16"
ABS-100G Gate Frame Size Requirements
OPENING
A (in)		 LEAF WEIGHT
P/2 MAX (lbs)		 GATE FRAME MIN
TUBE SIZE (in)
60" (5') 330 4" x 2" 11 Ga
78" (6'6") 330 4" x 2" 11 Ga
96" (8') 330 4" x 2" 11 Ga
120" (10') 330 6" x 2" 11 Ga
144" (12') 330 6" x 2" 11 Ga
156" (13') 330 6" x 2" 11 Ga
NOTE: For leaf weights (P/2) over 330 lbs., contact AIDI for technical support at 908.757.2323

 

As indicated in the table above, we recommend the use of tubing specified to make your gate structurally sound/rigid to avoid bending during opening and closing cycles. It is also advisable to limit the overall gate weight as much as possible.

Spec Sheet

Albatros Kit

ABS-100G

Use this kit for single gates up to 13ft or double gates up to 26ft

Hinge to Post Connector

ABS-10G

This tube is 9'10" long, supplied raw

Ground Strike

ABS-16

Use for left or right swinging gates.6-1/4” dia., 1-3/16” high

Drilling template with rivets and screws

ABS-20G

Spec Sheet

Spec Sheet

Ground Mount - Screw-On Hinge Set

85PST-G & 87PST-G

3/16" thick mounting bracket
9/16" Gap adjustment
Sealed Bearings
2" Hinge diameter

Spec Sheet

Spec Sheet

Post Mount - Screw-On Hinge Set

85L-G & 87L-G

3/8" thick mounting bracket
9/16" Gap adjustment
Sealed Bearings
2" Hinge diameter

Spec Sheet

Spec Sheet

Ground Mount - Weld-On Hinge Set

85G & 87G

3/8" thick mounting bracket
9/16" Gap adjustment
Sealed Bearings
2" Hinge diameter

      
Compare Products
  1. Remove This Item
Compare
Clear All
You have no items to compare.
My Wish List
Last Added Items
  1. Add to Cart
    Remove This Item
Go to Wish List
You have no items in your wish list.

Privacy PolicyTerms & ConditionsCopyrights © 2025.