NOTE: Most product dimensions are approximate within manufacturing tolerances and in many cases are a close approximation after converting from metric.

Model CGA-350.5M, Small Carriage, Opening & Weight Range: 10 ft. up to 550 lbs. / 16 ft. up to 300 lbs.

Item Number
CGA-350.5M, CGA-345M, CGA-347M, CGA-346M
Grouped product items

Aluminum Carriage, Small, 5 Nylon Wheels, Monobloc

Small carriage with 5 nylon rollers for aluminum track

Item Number : CGA-350.5M

PRICE :

$170.00

QTY :

Bottom Track for CGA-350.5M, Aluminum, 9'10" Long, 3-1/4" W x 3-1/8" H

Small aluminum track to be used with CGA-350.5M carriages.

Measures 3-1/4" W x 3-1/8" H x 9'10" Long

The aluminum alloy used for this track is AW-6060 T5 EN 573-1.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, track must be cut to no more than 7'9" feet. There is a $10.00 per cut charge.

Item Number : CGA-345M-9.84FT

PRICE :

$352.00

QTY :

Bottom Track for CGA-350.5M, Aluminum, 19'8" Long, 3-1/4" W x 3-1/8" H

Small aluminum track to be used with CGA-350.5M carriages.

Measures 3-1/4" W x 3-1/8" H x 19'8" Long

The aluminum alloy used for this track is AW-6060 T5 EN 573-1.

One of our customer service representatives will contact you in regards to shipping your item.

Item Number : CGA-345M-19.68F

PRICE :

$704.00

QTY :

End Wheel for CGA-345M Small Track, Aluminum

End wheels serve three functions:

1)     covering the end of the track for UL325 compliance when the gate is automated,
2)     assisting the gate to seat effortlessly into the end cup receiver to stabilize the gate in the open and closed positions, and
3)     keep dirt and debris out of the track for smoother operation.

Item Number : CGA-347M

PRICE :

$48.70

QTY :

Bottom End Cup for CGA-345M Small Track, Aluminum

End cups are used to stabilize the gate in the fully open and closed positions AND to provide a positive gate stop to meet safety code for automated gates. Typically 2 are used per gate. For gates that stay closed most of the time only 1 is needed.

Item Number : CGA-346M

PRICE :

$31.60

QTY :

Foundation Plate for Large Carriage, Stainless Steel

Foundation Plates make it easier to level and align the carriages, but are not required.

Item Number : CGI-05P

PRICE :

$78.80

QTY :

Foundation Plate for Large Carriage, Galvanized Steel

Foundation Plates make it easier to level and align the carriages, but are not required.

Item Number : CG-05P

PRICE :

$79.50

QTY :

J-Bolt, M16 x 15", Galvanized

J-Bolts set into newly poured concrete are the best method of anchoring the carriages to the pad.

Mini carriages require 4 J-Bolts per carriage. 

Large, Grande & Extra Large carriages require 6 J-Bolts per carriage

Item Number : CG-348-M16

PRICE :

$15.80

QTY :

Item Summary

The CGA-350.5M model is our light duty aluminum hardware. This hardware is used for residential and commercial sliding gates, especially where the application calls for an aluminum gate.

The opening and weight range: 
10 ft. up to 550 lbs.
16 ft. up to 300 lbs.

Don't forget to visit the Accessory category to choose from a variety of accessories to complete your sliding gate project.

More Information
SKU CGA-350.5M, CGA-345M, CGA-347M, CGA-346M
Brands Comunello