Quick-Connect® threaded terminal for 1/8" cable.

Measurements:
Thread = 1/4"-20
T = 5"
L = 7-3/8"
QCØ = 7/16"

DrillØ = 5/16" **
**May counterbore with slightly larger diameter drill to embed Quick-Connect® body into post

Attaches to the face of the post using lag screws, bolts, or button head lag screws (sold separately). Tension is adjusted by spinning the tubular body. 130° pivoting allows for angled stair terminations. 3-1/4" of adjustability allows for maximum cable run lengths.

Typically paired with Quick-Connect® Fixed Surface Mount or another Surface Mount Turnbuckle.

Measurements:
Thread = 1/4"-28
EØ = 1/4"
H† = 1-5/16"
W = 5/8"
BØ = 7/16"
L closed (open) = 7-3/4" (11")
QCØ = 7/16"

† since flanges are formed pieces, allow a tolerance of ± 1/16" on flange hole span dimension (H)

Screws into the face of a wood post using a hanger bolt with lag thread (included). Tension adjusted by spinning the special swiveling turnbuckle body.

Typically paired with a QuickConnect® Lag or another QuickConnect® Lag Swivel Turnbuckle.

Measurements:
Thread = 1/4"-20
T = 2"
L closed (open) = 5-1/8" (5-7/8")
QCØ = 7/16"
Pilot Drill 7/62" *

Packaged with 2 Lag Screws

* Drill Pilot Hole slightly larger if using hardwood posts.

Quick-Connect® Pivot Swivel Turnbuckle for 1/8" Cable

Screws into the face of a wood post or wall using a hanger bolt with lag thread (included). Tension adjusted by spinning the special swiveling turnbuckle body. 180° pivoting allows for angled stair terminations.

Typically paired with a Quick-Connect® Pivot or another Quick-Connect® Pivot Swivel Turnbuckle.

Measurements:
Thread = 1/4-20
T = 2" (2-1/2")
L closed = 7" (7-3/4")
L open = 7-1/2" (8-1/4")
QCØ = 7/16"
Pilot Drill 7/64" *

Packaged with 2 lag screws

* Drill Pilot Hole slightly larger if using hardwood posts.