Before painting or adding a patina to a metal surface, it should be clean and free of any dirt or grease. This is particularly true when working with iron, steel or aluminum. The rust, fire scale and polishing compound must be removed. The best method for cleaning most metal is to sandblast but sometimes this is not an option. Wire wheels or Scotch-Brite Pads are another method of cleaning and so is Sculpt Nouveau’s Metal Cleaner/Degreaser. It works on both ferrous and non-ferrous metals. This cleaner is specifically formulated for the rapid and complete removal of rust, dirt, oil and grease from most iron surfaces in preparation for metal finishing.

It is not advised to use solvent based thinners (acetone, paint thinners and the like) these products leave a residue on the metal and will interfere and alter how the paint will adhere or if applying a patina, how it will react.

Download the safety data sheet for the Metal Cleaner and Degreaser HERE

Metal Cleaner

Add to Wish List Add to Compare

SUR08ZMDD, SUR32ZMDD and SUR01GMDD

Metal Cleaner Degreaser, complete removal of rust, dirt, oil and grease from most metal surfaces.

Shopping Options

Metal Cleaner

SUR08ZMDD, SUR32ZMDD and SUR01GMDD

Metal Cleaner Degreaser, complete removal of rust, dirt, oil and grease from most metal surfaces.

Address

Links

Subscribe Newsletter

Member Of

Checkout

Metal Cleaner

SUR08ZMDD, SUR32ZMDD and SUR01GMDD

Metal Cleaner Degreaser, complete removal of rust, dirt, oil and grease from most metal surfaces.

Subscribe Newsletter

Member Of