Deimos Ultra BT A600 UL Gate Operator Kit, Electromechanical Automation for Rack Sliding Gates

Important. This product is intended to be installed and serviced by a professional technician. The product warranty may be voided if installed or serviced by an unqualified person.

This DEIMOS Kit is used to automate sliding gates weighing up to 1100 lbs (~500 kg) for residential use.

• SMART TECHNOLOGY.
> Magnetic limit switch control at the end cycle.
> Incorporated two-channel rolling code radio receiver.
> Self contained control panel unit with  self-learning and self-diagnostic functions.
> Control unit compatible with the EElink protocol and Solor compatiable with “Ecosol” solar kit.

• SAFE USE.
>  This version powered at 24V has been specifically designed for simpler and faster installation in compliance with the latest UL 325-2016 safety standards.
>  The 24 V electrical motor guarantees maximum accuracy in torque and speed control on the one hand, and on the other makes it suitable for intensive gate use, even in
    industrial installations.Optional battery back-up can be fitted within the operator casing. These operators are all “Ecosol” solar compatible.
>  Contains obstruction sensing device, the operator reverses motion and prevents damage to people and vehicles in the event of contact.

Deimos Kit contains:
• 1 DEIMOS BT, operator with incorporated control board and rolling-code receiver
• 1 set of Reflective photocells
• 1 Mitto 2 12V two-channel rolling code remote controls