Item Summary

main product photo

Model CGS-500.8G, Grande Carriage, Opening & Weight Range: 16 ft. up to 2700 lbs. / 52 ft. up to 2350 lbs.

Item Number
CGS-500.8G, CGS-345G, CG-50G, CG-55G
Grouped product items

Integrator Carriage Kit, Grande, Primary & Secondary

Item Number : CGS-500.8G

Grande Primary/Secondary 8-wheel carriage set.

Driven by primary carriage.

QTY :

$2,569.60

Bottom Track for 350.8G & 500.8G, Galvanized, 9'10" Long, 5-1/2" W x 5-1/2" H

Item Number : CGS-345G-9.84FT

Grande galvanized steel track to be used with CGS-350.8G carriages.

Measures 5-1/2" W x 5-1/2" H x 9'10" Long

QTY :

$844.80

Bottom Track for 350.8G & 500.8G, Galvanized, 19'8" Long, 5-1/2" W x 5-1/2" H

Item Number : CGS-345G-19.68F

Grande galvanized steel track to be used with CGS-350.8G carriages.

Measures 5-1/2" W x 5-1/2" H x 19'8" Long

QTY :

$1,689.50

3.3FT Gear Rack w/Mounting Screws, for Grande Integrator Model, Galvanized

Item Number : CG-50G

This gear rack mounts to the top, inside the galvanized track completely hiding the drive system. The gear in the primary carriage drives the track and the gate with no exposed hardware for complete protection.

This gear rack is 3'3" long and comes with mounting screws.

QTY :

$129.00

Rack Centering Device Kit for use with CG-50G Gear Rack

Item Number : CG-55G

Two piece set, reusable. Use this installation tool to accurately center and align the gear rack inside the track. It centers the rack down the length of the track, aligns the teeth at rack joints to prevent gear binding, and acts as a drilling jig to hold the rack into place as the mounting holes are drilled.

QTY :

$412.80

End Wheel for CGS-345G Grande Track, Galvanized

Item Number : CGS-347G

End wheels serve three functions:

1)     covering the end of the track for UL325 compliance when the gate is automated,
2)     assisting the gate to seat effortlessly into the end cup receiver to stabilize the gate in the open and closed positions, and
3)     keep dirt and debris out of the track for smoother operation.

QTY :

$125.70

End Stopper w/o the wheel for the Grande Track, Galvanized

Item Number : CG-21G

This end stopper covers the the end of the track for UL325 compliance when the gate is automated and helps keep dirt and debris out of the track for smoother operation.

QTY :

$25.20

Bottom End Cup for CGS-345G Grande Track, Galvanized

Item Number : CGS-346G

End cups are used to stabilize the gate in the fully open and closed positions AND to provide a positive gate stop to meet safety code for automated gates. Typically 2 are used per gate. For gates that stay closed most of the time only 1 is needed.

QTY :

$69.20

Lower Gate Receiver with 6-3/8" wide Nylon Roller, Galvanized

Item Number : CG-25G

This lower gate receiver can be used in place of the bottom end receiving cup.  The nylon roller is 6-3/8" wide and will work with the small cantilever track models.

QTY :

$165.20

J-Bolt, M20 x 15", Galvanized

Item Number : CG-348-M20

J-Bolts set into newly poured concrete are the best method of anchoring the carriages to the pad.

Mini carriages require 4 J-Bolts per carriage. 

Large, Grande & Extra Large carriages require 6 J-Bolts per carriage

QTY :

$35.70

Foundation Plate for Grande Carriage, Galvanized Steel

Item Number : CG-05G

Foundation Plates make it easier to level and align the carriages, but are not required.

QTY :

$155.90

Integrator Drive Shaft Coupling, Comunello, Grande Model

Item Number : CG-58G

This coupling connects the output driveshaft of the gate operator directly to the input driveshaft on the primary carriage. This gives a direct, secure and safe connection between the motor and the gate.

Use with Integrator models CGS-500.8G

QTY :

$248.80

Integrator Drive Shaft Coupling, ARES, Grande Model

Item Number : CG-58G-ARES

This drive shaft coupling will be used if the ARES gate operator, by BFT, is used to automate the sliding gate.

Use with Integrator model CGS-500.8G

QTY :

$297.30

Integrator Drive Shaft Coupling, FAAC 844ER, Grande Model

Item Number : CG-58G-FAAC844

This drive shaft coupling will be used if the FAAC 844ER gate operator is used to automate the sliding gate.

Use with Integrator model CGS-500.8G

QTY :

$256.70
x

MODEL CGS-500.8G--OPENING & WEIGHT RANGE
16 ft. up to 2700 lbs.  /  52 ft. up to 2350 lbs.

The Integrator (internal drive) galvanized steel cantilever system offers protection from the weather, from tampering, from personal injury and from unsightly chains. It is automation ready and the mechanics disapper for a clean simple look.

The Integrator hides the drive gear in the carriage and the gear rack inside the track and couples the gate operator directly to the carriage for a unique integrated system that completely hides the drive mechanics.

  • The drive pinion and gear rack are completely protected inside the carriage and track, which guarantees excellent protection from ice blockages and other weather related problems.
  • Carriage with integrated pinion provides for an easy installation: simply connect the carriage directly to the gate operator using the drive shaft coupling
  • Suitable for temperatures ranging from -22°F to 176°F.
  • The integrated drive system protects the moving parts and gives a clean, elegant look while increasing personal safety.

FEATURES & BENEFITS

  • Noiseless bearings of new generation shielded to protect against dust suitable for temperatures from -22°F to 176°F
  • Self-balancing
  • 8 support wheels for each carriage
  • Quiet operation
  • Increased personal safety
  • Next Gen technology

Don't forget to visit the Accessory category to choose from a variety of accessories to complete your sliding gate project.

More Information
More Information
SKU CGS-500.8G, CGS-345G, CG-50G, CG-55G
Brands Comunello
Product Attachment
Spec Sheets for Model CGS-500.8G (Size: 26.2 MB)
CAD files for Model CGS-550.8G (Size: 1.2 MB)
CSI Specifications for DuraGates & Integrator Cantilever Gates (Size: 28.7 KB)