The Push-Lock® with Lag Clevis is an exposed, swageless, non-tensioning, face-of-the-post-mounted ﬁtting that is suitable for level or pitched runs, and is available for 1/8” and 3/16” diameter 1x19 stainless steel cable.
The Push-Lock® with Lag Clevis can be used with any tensioning ﬁtting on the opposite end of the run. This ﬁtting is installed into a pre-drilled hole in the wood end post. Drive the lag thread into the hole until the ﬁtting shoulders on the post face. The cable attaches to the body via our Push-Lock® locking wedge system which requires no special tools.
While this ﬁtting can be used on pitched or level runs, it is most appropriate for pitched runs because the body of the ﬁtting pivots at the clevis. The pre-drilled hole for the lag eye is drilled level, making installation easy.
|Cable Size||3/16" Cable|
|Fittings||Swageless non-tensioning fittings|