Skip to the beginning of the images gallery

Nylon and Rubber Guide Rollers

Item Number

253-40, CGS-499, CG-35, NR3, NR6, RR3, RR6 & RR12

Grouped product items
10" Side Nylon Roller, 1-1/4" Dia w/2" Clearance Item Number : 253-40 This big nylon roller can be used to help guide your gate when top guides or monorail options are not feasible. Roller is 10" high. Must use at least 2 per gate. QTY : $73.40
3" Rubber Guide Roller, 2-3/8" dia., to be Welded Item Number : RR3 This 3" rubber guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the rubber roller to be easily removed. The roller is 2-3/8" in diameter. QTY : $11.30
6" Rubber Guide Roller, 2-3/8" dia., to be Welded Item Number : RR6 This 6" rubber guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the rubber roller to be easily removed. The roller is 2-3/8" in diameter. QTY : $19.60
12" Rubber Guide Roller, 2-3/8" dia., to be Welded Item Number : RR12 This 12" rubber guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the rubber roller to be easily removed. The roller is 2-3/8" in diameter. The air gap between the bracket and roller is 1/2". QTY : $40.50
3" Nylon Guide Roller, 2-1/4" dia., Non-Marring, to be Welded Item Number : NR3 This 3" nylon guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the roller to be easily removed. The roller is 2-1/4" in diameter. QTY : $12.70
6" Nylon Guide Roller, 2-1/4" dia., Non-Marring, to be Welded Item Number : NR6 This 6" nylon guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the roller to be easily removed. The roller is 2-1/4" in diameter. QTY : $23.40
Side Mount Guide Roller for Heavy Gates, 1100 lbs. side load, Galvanized, Use in Pairs Item Number : CGS-499 This large guide roller can be used to help guide your gate when top guides or monorail options are not feasible. 1100 lb. side load capacity. Use in pairs QTY : $130.50
Intermediate Support with 4-13/16" wide Nylon Roller, Galvanized Item Number : CG-35P This intermediate support roller is to be used at the back of the cantilever gate for added stability and support. The nylong roller is 4-7/8" wide. QTY : $93.20
Intermediate Support with 6-3/8" wide Nylon Roller, Galvanized Item Number : CG-35G This intermediate support roller is to be used at the back of the cantilever gate for added stability and support. The nylong roller is 6-3/8" wide. QTY : $156.40

Details

AIDI offers a variety of guide rollers that can be used with rolling, sliding or cantilever gates.

Two posts would be installed on either side of the gate and then 2 or more rollers would be used on each posts to keep the gate steady at the top when opening or closing.

More Information