NOTE: Most product dimensions are approximate within manufacturing tolerances and in many cases are a close approximation after converting from metric.

Nylon and Rubber Guide Rollers

Item Number
253-40, CGS-499, NR3, NR6, RR3, RR6 & RR12
Grouped product items

10" Side Nylon Roller, 1-1/4" Dia w/2" Clearance

This big nylon roller can be used to help guide your gate when top guides or monorail options are not feasible.

Roller is 10" high. Must use at least 2 per gate.

Item Number : 253-40

PRICE :

$61.00

QTY :

3" Rubber Guide Roller, 2-3/8" dia., to be Welded

This 3" rubber guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the rubber roller to be easily removed.

The roller is 2-3/8" in diameter.

Item Number : RR3

PRICE :

$9.20

QTY :

6" Rubber Guide Roller, 2-3/8" dia., to be Welded

This 6" rubber guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the rubber roller to be easily removed.

The roller is 2-3/8" in diameter.

Item Number : RR6

PRICE :

$14.80

QTY :

12" Rubber Guide Roller, 2-3/8" dia., to be Welded

This 12" rubber guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the rubber roller to be easily removed.

The roller is 2-3/8" in diameter.

The air gap between the bracket and roller is 1/2".

Item Number : RR12

PRICE :

$27.10

QTY :

3" Nylon Guide Roller, 2-1/4" dia., Non-Marring, to be Welded

This 3" nylon guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the roller to be easily removed.

The roller is 2-1/4" in diameter.

Item Number : NR3

PRICE :

$11.10

QTY :

6" Nylon Guide Roller, 2-1/4" dia., Non-Marring, to be Welded

This 6" nylon guide roller is supplied with a back plate that is to be welded in place. The bolt allows for the roller to be easily removed.

The roller is 2-1/4" in diameter.

Item Number : NR6

PRICE :

$17.30

QTY :

Side Mount Guide Roller for Heavy Gates, 1100 lbs. side load, Galvanized, Use in Pairs

This large guide roller can be used to help guide your gate when top guides or monorail options are not feasible.

1100 lb. side load capacity. Use in pairs

Item Number : CGS-499

PRICE :

$130.25

QTY :

Item Summary

AIDI offers a variety of guide rollers that can be used with rolling, sliding or cantilever gates.

Two posts would be installed on either side of the gate and then 2 or more rollers would be used on each posts to keep the gate steady at the top when opening or closing.

More Information
SKU 253-40, CGS-499, NR3, NR6, RR3, RR6 & RR12