Skip to the beginning of the images gallery

Model CGS-500.8P, Large Carriage, Opening & Weight Range: 12 ft. up to 1400 lbs. / 35 ft. up to 1300 lbs.

Item Number

CGS-500.8P, CGS-345P, CG-50P, CG-55P

Grouped product items
Integrator Carriage Kit, Large, Primary & Secondary Item Number : CGS-500.8P Large Primary/Secondary 8-wheel carriage set. Driven by primary carriage. QTY : $1,007.80
Bottom Track for 350.8P & 500.8P, Galvanized, 6'6" Long, 4" W x 3-1/2" H Item Number : CGS-345P-6.6FT Large galvanized steel track to be used with CGS-350.8P carriages. Measures 4" W x 3-1/2" H x 6'6" Long QTY : $239.90
Bottom Track for 350.8P & 500.8P, Galvanized, 9'10" Long, 4" W x 3-1/2" H Item Number : CGS-345P-9.84FT Large galvanized steel track to be used with CGS-350.8P carriages. Measures 4" W x 3-1/2" H x 9'10" Long One of our customer service representatives will contact you in regards to shipping your item. In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $20.00 per cut charge. The shipping charges calculated at time of checkout will vary due to weight and box size. QTY : $330.90
Bottom Track for 350.8P & 500.8P, Galvanized, 19'8" Long, 4" W x 3-1/2" H Item Number : CGS-345P-19.68F Large galvanized steel track to be used with CGS-350.8P carriages. Measures 4" W x 3-1/2" H x 19'8" Long One of our customer service representatives will contact you in regards to shipping your item. In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $20.00 per cut charge. The shipping charges calculated at time of checkout will vary due to weight and box size. QTY : $662.00
4.92FT Gear Rack w/Mounting Screws, for Large Integrator Model, Galvanized Item Number : CG-50P This gear rack mounts to the top, inside the galvanized track completely hiding the drive system. The gear in the primary carriage drives the track and the gate with no exposed hardware for complete protection. This gear rack is 4'11" long and comes with mounting screws. QTY : $75.40
Rack Centering Device Kit for use with CG-50P Gear Rack Item Number : CG-55P Two piece set, reusable. Use this installation tool to accurately center and align the gear rack inside the track. It centers the rack down the length of the track, aligns the teeth at rack joints to prevent gear binding, and acts as a drilling jig to hold the rack into place as the mounting holes are drilled. QTY : $344.60
End Wheel for CGS-245P/345P Large Track, Galvanized Item Number : CGS-347P End wheels serve three functions: 1) covering the end of the track for UL325 compliance when the gate is automated, 2) assisting the gate to seat effortlessly into the end cup receiver to stabilize the gate in the open and closed positions, and 3) keep dirt and debris out of the track for smoother operation. QTY : $76.70
End Stopper w/o the wheel for the Large Track, Galvanized Item Number : CG-21P This end stopper covers the the end of the track for UL325 compliance when the gate is automated and helps keep dirt and debris out of the track for smoother operation. QTY : $20.60
Bottom End Cup for CGS-245P/345P Large Track, Galvanized Item Number : CGS-346P End cups are used to stabilize the gate in the fully open and closed positions AND to provide a positive gate stop to meet safety code for automated gates. Typically 2 are used per gate. For gates that stay closed most of the time only 1 is needed. QTY : $40.30
Lower Gate Receiver with 4-7/8" Wide Nylon Roller, Galvanized Item Number : CG-25P This lower gate receiver can be used in place of the bottom end receiving cup. The nylon roller is 4-7/8" wide and will work with the large cantilever track models. QTY : $89.80
J-Bolt, M16 x 15", Galvanized Item Number : CG-348-M16 J-Bolts set into newly poured concrete are the best method of anchoring the carriages to the pad. Mini carriages require 4 J-Bolts per carriage. Large, Grande & Extra Large carriages require 6 J-Bolts per carriage QTY : $18.90
Foundation Plate for Large Carriage, Galvanized Steel Item Number : CG-05P Foundation Plates make it easier to level and align the carriages, but are not required. QTY : $95.60
Integrator Drive Shaft Coupling, Comunello, Small & Large Models Item Number : CG-58 This coupling connects the output driveshaft of the gate operator directly to the input driveshaft on the primary carriage. This gives a direct, secure and safe connection between the motor and the gate. Use with Integrator models CGS-500.8M and CGS-500.8P QTY : $56.20
Integrator Drive Shaft Coupling, DEIMOS, Small & Large Models Item Number : CG-58-DEIMOS This drive shaft coupling will be used if the DEIMOS gate operator, by BFT, is used to automate the sliding gate. Use with Integrator models CGS-500.8M and CGS-500.8P QTY : $337.20
Integrator Drive Shaft Coupling, ARES/ICARO, Small & Large Models Item Number : CG-58-ARES This drive shaft coupling will be used if the ARES gate operator, by BFT, is used to automate the sliding gate. Use with Integrator models CGS-500.8M and CGS-500.8P QTY : $259.40
Integrator Drive Shaft Coupling, FAAC 844ER, Small & Large Models Item Number : CG-58-FAAC844ER This drive shaft coupling will be used if the FAAC 844ER gate operator is used to automate the sliding gate. Use with Integrator models CGS-500.8M and CGS-500.8P QTY : $256.20
Jack shaft adaptor for chain driven operator, Bolt-on Item Number : CGS-MP-ADP When used in conjunction with the CG-58 coupling, this allows a typical chain drive gate operator to be used to drive the Duragates Integrator carriage to open, close, and control a cantilever slide gate. QTY : $547.80
Post Mount Bracket for 4" sq. Tubing. Sold as a pair. Includes bolts for bracket & carriage. Use with the "P" Carriages Item Number : CG-PBSP Galvanized post mount bracket for the large "P" Duragates cantilever carriages. This bracket will fit around 4" square tubing. Sold as a pair. Includes bolts for bracket & carriage. QTY : $242.30
Post Mount Bracket for 4" dia. Tubing. Sold as a pair. Includes bolts for bracket & carriage. Use with the "P" Carriages Item Number : CG-PBRP Galvanized post mount bracket for the large "P" Duragates cantilever carriages. This bracket will fit around 4" round tubing. Sold as a pair. Includes bolts for bracket & carriage. QTY : $265.50

Details

MODEL CGS-500.8P--OPENING & WEIGHT RANGE
12 ft. up to 1400 lbs. / 35 ft. up to 1300 lbs.

The Integrator (internal drive) galvanized steel cantilever system offers protection from the weather, from tampering, from personal injury and from unsightly chains. It is automation ready and the mechanics disapper for a clean simple look.

The Integrator hides the drive gear in the carriage and the gear rack inside the track and couples the gate operator directly to the carriage for a unique integrated system that completely hides the drive mechanics.

The drive pinion and gear rack are completely protected inside the carriage and track, which guarantees excellent protection from ice blockages and other weather related problems.
Carriage with integrated pinion provides for an easy installation: simply connect the carriage directly to the gate operator using the drive shaft coupling
Suitable for temperatures ranging from -22°F to 176°F.
The integrated drive system protects the moving parts and gives a clean, elegant look while increasing personal safety.

FEATURES & BENEFITS

Noiseless bearings of new generation shielded to protect against dust suitable for temperatures from -22°F to 176°F
Self-balancing
8 support wheels for each carriage
Quiet operation
Increased personal safety
Next Gen technology

Don't forget to visit the Accessory category to choose from a variety of accessories to complete your sliding gate project.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $20.00 per cut charge.

The shipping charges calculated at time of checkout will vary due to weight and box size.

More Information

More Information
SKU	CGS-500.8P, CGS-345P, CG-50P, CG-55P
Brands	Comunello

Product Attachment

Spec Sheets for Model CGS-500.8P (Size: 25.7 MB)

CAD files for Model CGS-500.8P (Size: 1.2 MB)

Post Mount Brackets for Large "P" Carriages (Size: 816.3 KB)

CSI Specifications for DuraGates & Integrator Cantilever Gates (Size: 28.7 KB)

Item Summary

Share it:

Model CGS-500.8P, Large Carriage, Opening & Weight Range: 12 ft. up to 1400 lbs. / 35 ft. up to 1300 lbs.

Integrator Carriage Kit, Large, Primary & Secondary

Bottom Track for 350.8P & 500.8P, Galvanized, 6'6" Long, 4" W x 3-1/2" H

Bottom Track for 350.8P & 500.8P, Galvanized, 9'10" Long, 4" W x 3-1/2" H

Bottom Track for 350.8P & 500.8P, Galvanized, 19'8" Long, 4" W x 3-1/2" H

4.92FT Gear Rack w/Mounting Screws, for Large Integrator Model, Galvanized

Rack Centering Device Kit for use with CG-50P Gear Rack

End Wheel for CGS-245P/345P Large Track, Galvanized

End Stopper w/o the wheel for the Large Track, Galvanized

Bottom End Cup for CGS-245P/345P Large Track, Galvanized

Lower Gate Receiver with 4-7/8" Wide Nylon Roller, Galvanized

J-Bolt, M16 x 15", Galvanized

Foundation Plate for Large Carriage, Galvanized Steel

Integrator Drive Shaft Coupling, Comunello, Small & Large Models

Integrator Drive Shaft Coupling, DEIMOS, Small & Large Models

Integrator Drive Shaft Coupling, ARES/ICARO, Small & Large Models

Integrator Drive Shaft Coupling, FAAC 844ER, Small & Large Models

Jack shaft adaptor for chain driven operator, Bolt-on

Post Mount Bracket for 4" sq. Tubing. Sold as a pair. Includes bolts for bracket & carriage. Use with the "P" Carriages

Post Mount Bracket for 4" dia. Tubing. Sold as a pair. Includes bolts for bracket & carriage. Use with the "P" Carriages