Model CGS-350.8G, Grande Carriage, Opening & Weight Range: 16 ft. up to 4000 lbs. / 60 ft. up to 1800 lbs.

Grande carriage with monobloc body.

Grande galvanized steel track to be used with CGS-350.8G carriages.

Measures 5-1/2" W x 5-1/2" H x 9'10" Long

Grande galvanized steel track to be used with CGS-350.8G carriages.

Measures 5-1/2" W x 5-1/2" H x 19'8" Long

End wheels serve three functions:

1)     covering the end of the track for UL325 compliance when the gate is automated,
2)     assisting the gate to seat effortlessly into the end cup receiver to stabilize the gate in the open and closed positions, and
3)     keep dirt and debris out of the track for smoother operation.

This end stopper covers the the end of the track for UL325 compliance when the gate is automated and helps keep dirt and debris out of the track for smoother operation.

End cups are used to stabilize the gate in the fully open and closed positions AND to provide a positive gate stop to meet safety code for automated gates. Typically 2 are used per gate. For gates that stay closed most of the time only 1 is needed.

This lower gate receiver can be used in place of the bottom end receiving cup.  The nylon roller is 6-3/8" wide and will work with the small cantilever track models.

J-Bolts set into newly poured concrete are the best method of anchoring the carriages to the pad.

Mini carriages require 4 J-Bolts per carriage. 

Large, Grande & Extra Large carriages require 6 J-Bolts per carriage

Foundation Plates make it easier to level and align the carriages, but are not required.