On sliding and/or rolling gates this U-channel is installed on the back side of the gate at least half way up the height of the gate. This U-channel will allow for protruding pickets or arched top gates.

On the telescoping gate system, this U-Channel is used on the 2nd and 3rd gate leaves in conjunction with an upper guide plate to ensure the telescoping gate will be steady at the top.

Monorail supplied in 9.84FT sections (3000mm)

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $5.00 per cut charge.

On sliding and/or rolling gates this U-channel is installed on the back side of the gate at least half way up the height of the gate. This U-channel will allow for protruding pickets or arched top gates.

On the telescoping gate system, this galvanized 1-1/4" I.D. U-Channel is used on the 2nd and 3rd gate leaves in conjunction with an upper guide plate to ensure the telescoping gate will be steady at the top.

This channel has a 1-3/8" OD, 1-1/4" ID. It is 1-3/8" tall and 1/16" thick.

Supplied is 9'10" lengths.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $5.00 per cut charge.

On sliding and/or rolling gates this U-channel is installed on the back side of the gate at least half way up the height of the gate. This U-channel will allow for protruding pickets or arched top gates.

On the telescoping gate system, this galvanized 1-1/4" I.D. U-Channel is used on the 2nd and 3rd gate leaves in conjunction with an upper guide plate to ensure the telescoping gate will be steady at the top.

This channel has a 1-3/8" OD, 1-1/4" ID. It is 1-3/8" tall and 1/16" thick.

Supplied is 19'8" lengths.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $5.00 per cut charge.

On sliding and/or rolling gates this U-channel is installed on the back side of the gate at least half way up the height of the gate. This U-channel will allow for protruding pickets or arched top gates.

On the telescoping gate system, this aluminum 1-1/4" I.D. U-Channel is used on the 2nd and 3rd gate leaves in conjunction with an upper guide plate to ensure the telescoping gate will be steady at the top.

Use with guide roller, item 258.30

Supplied is 10' lengths.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $5.00 per cut charge.

On sliding and/or rolling gates this U-channel is installed on the back side of the gate at least half way up the height of the gate. This U-channel will allow for protruding pickets or arched top gates.

On the telescoping gate system, this aluminum 1-1/4" I.D. U-Channel is used on the 2nd and 3rd gate leaves in conjunction with an upper guide plate to ensure the telescoping gate will be steady at the top.

Use with guide roller, item 258.30

Supplied is 20' lengths.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, bar must be cut to no more than 7'9" feet. There is a $5.00 per cut charge.

This single guide roller works only with U-Channel/Guide Rail item CG-254

This double guide roller works with U-channel items CG-254, RG-387 and CG-237