Large carriage with multiplate body.

Large galvanized steel track to be used with CGS-250.8P carriages.

Measures 4" W x 3-1/2" H x 9'10" Long

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, track must be cut to no more than 7'9" feet. There is a $10.00 per cut charge.

Large galvanized steel track to be used with CGS-250.8P carriages.

Measures 4" W x 3-1/2" H x 19'8" Long

One of our customer service representatives will contact you in regards to shipping your item.

End wheels serve three functions:

1)     covering the end of the track for UL325 compliance when the gate is automated,
2)     assisting the gate to seat effortlessly into the end cup receiver to stabilize the gate in the open and closed positions, and
3)     keep dirt and debris out of the track for smoother operation.

End cups are used to stabilize the gate in the fully open and closed positions AND to provide a positive gate stop to meet safety code for automated gates. Typically 2 are used per gate. For gates that stay closed most of the time only 1 is needed.

J-Bolts set into newly poured concrete are the best method of anchoring the carriages to the pad.

Mini carriages require 4 J-Bolts per carriage. 

Large, Grande & Extra Large carriages require 6 J-Bolts per carriage

Foundation Plates make it easier to level and align the carriages, but are not required.